Porter Cable circular saw blade replacement is quick and simple. It takes just a few moments.
In quick way, to change the blade on your Porter Cable Circular Saw, first, unplug the saw. Next, take out the blade guard and unscrew the screws holding it in place. Next, remove the old blade by loosening the arbor nut and pulling the blade off. Next, remove the old blade and pull it off.
Keep reading because in this guide, Ill walk you through the steps needed to get the job done right. So, whether youre a seasoned DIY-er or just starting out, follow along and youll have that new blade installed in no time.
Step: 1
Turn off your circular saw’s power and unplug it from the power source. Ensure that no other members of your household are using this tool as well.
Step: 2
Unscrew the wing nut that holds in your saws existing blade.
Step: 3
Use your screwdriver and remove the base plate.
Step: 4
In the hole left by the original base plate, screw in one of the bolts that came with the replacement.
Step: 5
Fit the new blade into the base plate, pressing down until you hear a soft click. Ensure that its properly seated and turn your attention to the top of the saw.
Step: 6
Replace the bolt at each corner of the base plate that has been installed with the one included in the replacement kit.
Step: 7
Turn on the circular saw by tightening the wingnut.
Tools:
A Video Guide On How To Change Blade On Porter Cable Circular Saw:
How to change the blade of a porter cable circular saw
Instructions: How To Change The Blade On A Porter Cable Circular Saw:
Follow these simple steps, and youll have your Porter Cable saw up and running with a brand-new blade in no time at all. Have fun sawing!
Shut Off The Saw And Unplug It From The Power Source
- This job is not for you if you don’t want to provide power (to your saw),
- You can remove the base plate using your screwdriver. If you don’t have magnetic tools, use a flat-head or Phillips-head screwdriver.
- Screw-in one of the bolts included with the replacement base plate into the hole that was abandoned when you ejected the old one: its best to pre-thread these bolts through their corresponding holes before plugging them back in.
- Place the blade in the base plate and press down until it clicks. This is crucial. You will know everything is securely seated when the new saw-blade clicks into place.
- Replace the second bolt in each corner of the newly-installed base plate with one provided for in the replacement kit: once again, pre-threading is easier than trying to do it after everythings in place.
- Turn on the circular saw by tightening the wingnut.
Take Out The Screws Holding The Blade Guard In Place:
- This will make it easier to move on to the next step.
- Unscrew screws from the old blade, and attach to the new one: simple enough, right?
- Place the screw in its proper place on the base plate. Two wing-nuts are included for replacement.
- Once youve got a firm grip on that newly-installed blade, youre ready to take it for a spin.
- Make sure that your saw is off and unplugged from the power source before starting this step: think of safety first.
- Turn on the circular saw and test out your brand new blade by cutting some scrap wood or other objects around the house. Make any necessary adjustments to the blade tension, and youre good to go.
- It is best practice to have someone assist you with this process. This is for your safety as well as that of others. For assistance, please contact your local hardware shop. Before you start the circular saw, it is recommended to unplug it. To avoid injury, ensure that the power supply is switched off before you start.
- There are many types of screws that secure the blade guard to the saw. Carefully remove these screws. If you have trouble removing these, you might want to use some pliers for more leverage. Next, remove the old blade from its socket and attach it to your new one. It is recommended that you do this carefully.
- This is a dangerous job. Install the screws in their corresponding places on the base plate once youve got a firm grip on the newly-installed blade. If necessary, tighten the wing nuts. Now you are ready to try your saw. You can adjust the tension of your blade as necessary.
- Porter Cable manufactures the circular saw, called the porter cable saw. This tool’s replacement kit can be found at many hardware stores such as Lowes or Home Depot. It is designed for use with P-C 690 or 690LR type saws.
- These steps will ensure that the blade change process is easy and efficient. There are several different types of screws on the saw that hold the blade guard in place. Carefully remove these screws, as they may require some further strength or leverage from a set of pliers to get off.
- If you have trouble removing them, it is recommended that you take your saw to a local hardware store. Unscrew or unscrews from the old blade, and attach to the new one. Once you have a firm grip on your newly-installed blade, the next step is to place the screws in the appropriate places on the base plate. Tighten wing nuts if necessary.
Insert The New Blade Into The Saw And Replace The Blade Guard:
- This is crucial. This is important.
- The replacement kit includes a second bolt to replace in each corner.
- The screws holding the blade guard in position will be removed. This will allow you to move on to the next step.
- Unscrew screws from the old blade, and attach to the new one: simple enough, right?
- Put screw down into its place on the base plate, along with two wing-nuts provided for installation in a replacement kit.
- Once youve got a firm grip on that newly-installed blade, youre ready to take it for a spin.
- Make sure that your saw is off and unplugged from the power source before starting this step: think of safety first.
- Turn on your circular saw, and try out your new blade by cutting scrap wood or other items around the house. You are now ready to adjust the tension of your blade.
- It is best practice to have someone assist you with this process. This is for your safety as well as that of others.
Conclusion:
This video will show you how to replace the blade of your Porter Cable circular saw. It is easy and requires only a few tools. Safety goggles are a must when using power tools. Also, make sure you follow the manufacturer’s instructions for each model of circular saw. Now that you know how to do it, go ahead and give it a try!
