Are you looking for a way to tighten the tensioning rod on your Dewalt scroll saw? This article is for you. We will show you step-by-step the steps to make it easy. No special tools or parts are required. We will show you what to do and where to find it. It’s as easy as 1 2 3.
You wont have to worry about spending money on expensive repairs or calling someone out every time something goes wrong with your tool. Follow these simple steps to get your machine back in working order in no time. This guide will save you a lot of hassle down the line if something goes wrong with your machine. Let’s get started!
1. Unplug the saw’s power source.
2. Take off the blade cover.
3. The tension rod is located on the back side of the saw.
4. Use an Allen wrench to loosen the set screw on the tensioning rod.
5. Turn the tensioning rod clockwise to increase the tension on the blade.
6. Use the Allen wrench to tighten the tensioning rod’s screw.
7. Replace the blade cover.
8. Connect the saw to the power supply.
Perhaps you are interested in How a Scroll Saw Works.
What Does A Tensioning Rod Do On A Scrollsaw?
A tensioning rod is a small, metal bar that helps to keep the blade of a scroll saw in place. The tensioning rod is placed through the middle blade. It is then tightened against the back with a knob/screw. This prevents the blade from vibrating or moving while you’re cutting.
How Do You Tighten The Tensioning Rod On A Dewalt Scroll Saw?
The process for tightening the tensioning rod on a Dewalt scroll saw is very simple. First, unplug the saw and remove the blade guard. Next, locate the tensioning bar at the back. To tighten the rod, turn the knob or screw located at the rod’s end. Learn how to tension a scroll saw blade.
As the rod tightens, it can become very tight if you don’t hold on to the blade. After tightening the rod, remove the blade guard and plug the saw in. You are now ready to start cutting.
What Are The Benefits Of Tightening Tension On A Scrollsaw?
Tightening the tension rod on a scrollsaw has many benefits. It ensures that your blade does not vibrate or move while you are cutting. This can lead to inaccurate cuts and even damage to the saw. It keeps the blade in its place, which leads to cleaner and more precise cuts.
Finally, it helps to extend the life of the blade by keeping it from bending or breaking.
How To Identify The Tensioning Rod On Your Scroll Saw?
The tensioning rod on a scroll saw is typically the longest, skinniest rod on the saw. It is also the one that is directly connected to the blade. The other rods are there for stability and do not affect the blade tension.
Tips To Keep Your Tension Rod On Your Scroll Saw In Place:
- To ensure it is tight, make sure to check the tension rod regularly.
- If the tensioning rod starts to loosen, use a wrench to tighten it.
- Before you start your saw, make sure that the blade is in good condition.
- Don’t overload your saw with blades that are too big for the material.
- If the blade begins to wobble, stop the saw and tighten the blade screws.
- Keep your hands and fingers away from the blade at all times.
- To operate the saw, use a foot pedal or push stick. (Learn about What Kind Of Bulb Goes Into The Dewalt Scroll Saw)
Safety Tips
It is crucial to follow safety precautions when working with power tools. Dewalt scroll saws are no exception. Here are a few safety tips to keep in mind when using a Dewalt scroll saw:
- Always read the instruction manual before using the scroll saw.
- Use the saw with caution.
- Before you start the saw, make sure that the workpiece is secured to the table.
- Never reach over or behind the blade while it is running.
- Don’t try to force the blade into a difficult cut. Let the saw do the work.
- Turn the saw off and unplug it before changing the blade or making any adjustments.
- Before you use the blade, make sure it is in tip-top condition.
